TECHNICAL DATA
Ecologic wall paint.
NATURAL LIME CL90 TYPE (UNE EN 459-1:2001)
Specific weight: 1.25 kg/l
Density: 1200kg/m3
.
Free water (moisture): 65%
Ph: 13
Complete drying at +23°C and 80% RH: approx. 24 hours
PROPERTIES
White, opaque, matt and mineral colour. Ease of application and plasticity. retention of
Water. Resistance to rainwater penetration. water vapor permeability
(allows the breathability of the support). Disinfectant and sterilizer.
STORAGE
Conditions: Well covered containers and in covered places.
Expiration: 18 months from the date of manufacture.
APPLICATION INSTRUCTIONS:
Product Handling: Shake before use.
Application utensils: Brush, brush or roller.
Applicable surfaces:
- Type: Mineral supports (concrete, mortars and lime coatings, mortars of
cement and other mineral paints).
- Preparation: The support must be clean and dry.
- To take into account: On plastic paint. It is necessary to use
sandpaper to open the pore and then apply a mineral fixative.
On plasterboard walls (plasterboard), apply
also mineral fixative.
-Application of the product: Once the support has been prepared, two or three layers will be applied.
The second coat will be applied at least 2 hours after the first.
Application utensils are cleaned with water.
Environmental conditions: Do not apply in extreme weather conditions.
Do not apply in
temperatures below 5 ºC or above 35 ºC, nor with a higher relative humidity
at 80%.
Yield: 4 – 5 m2/ Kg. with two coats.
Touch dry time: 1 hour.
2nd layer application time: 2 hours minimum.
SAFETY INFORMATION
Lime paint is alkaline. The product irritates the skin, so it is advisable to use rubber gloves when applying it and protective glasses. Avoid contact with eyes. In case of occurrence,
clean with plenty of water. Keep the product out of the reach of children.
